AC500 Ligature Resistant Hinge

AC500 Ligature Resistant Hinge

Ligature Resistant Pin and Barrel hinge approved by NY Office of Mental Health. Hinge has Zero gaps between the barrels.
$0.00

For use in behaviorial health facilities, hospitals, correctional facilities, or any institution where there are ligature risks.  ABH custom designed the AC500 by using our welded hospital tip and hinge leafs with flanges to encase the barrel. While most hospital tips are designed to work only in the closed door position, this design works whether the hinge is open or closed.

  • Features
    • Barrel cut at 45° and welded to close all gaps at the top and bottom
    • Each barrel is encased in the hinge leaf flange to close all gaps ("No See Through" Design)
    • Also available in A505 and A515 models

  • Technical Specifications
    • Hinge Material: 304 Stainless Steel 
    • Finish: Satin Stainless - Other Finishes by Request
    • Fasteners: Pin-in-Torx Screws
    • Meets ANSI BHMA 156.26 Grade 1
US32D - 630 - Satin Stainless Steel
  • "TW4" (4) 30 AWG Wires for Concealed Electrification
  • "TW8" (8) 30 AWG Wires for Concealed Electrification
  • "TW12" (12) 30 AWG Wires for Concealed Electrification
  • "EZ4" (4) 30 AWG Wires with Molex® Microfit 3.0 Connectors for Concealed Electrification
  • "EZ8" (8) 30 AWG Wires with Molex® Microfit 3.0 Connectors for Concealed Electrification
  • "EZ12" (12) 30 AWG Wires with Molex® Microfit 3.0 Connectors for Concealed Electrification
  • "M" Moveable Electrical Access Prep
  • "PT" Electrical Power Transfer Prep (Specify Electrical Power Transfer Model, Location & Handing
  • "AMS" Adjustable Monitoring Switch
  • "WEP" Welded End Pins
  • "CB" Clinical Bearings
  • "HT" Hospital Tip
  • "WEDGE" Safety Wedge for Half Surface & Full Surface Models
  • "DD" Dutch Door Prep
  • "STUD" Security Studs
  • "SEC" Fasteners
  • "CUT" Cut to Custom Length
  • "SPLICE" Spliced Hinge
  • "SL" - Sheared Leaf
  • "ADB" Cut for Automatic Door Bottom
  • "ADB-1840" Cut for Automatic Door Bottom with Removable Section (Specify ADB Make & Model)
  • "CUSTOM HOLE" Custom hole locations