A540HD Aluminum Continuous Gear Hinges Half Surface

Picture of A540HD Aluminum Continuous Gear Hinges Half Surface
Picture of A540HD Aluminum Continuous Gear Hinges Half Surface Picture of A540HD Aluminum Continuous Gear Hinges Half Surface Picture of A540HD Aluminum Continuous Gear Hinges Half Surface Picture of A540HD Aluminum Continuous Gear Hinges Half Surface

A540HD Aluminum Continuous Gear Hinges Half Surface

Standard / Heavy Duty Half Surface, Full Frame Leaf, 3/32" Inset
$0.00
  • BHMA Grade 1
  • Half Surface, Heavy Duty
  • 3/32" Door Inset
  • 48" door width maximum
  • 450 lbs. door weight maximum
  • Average weight per unit = 9 lbs

  • Fasteners:
    12-24 X 3/4" undercut self drilling, thread-forming tek machine screws for frame and 1/4-20 sex bolts and shoulder bolts for door

  • Standard Lengths:
    79", 83", 85", 95" and 120" + Custom Sizes Available

  • Fire Rating:
    • Approved for use on metal swinging type fire doors rated up to and including 90 minutes (Specifiy "FR" option for 3 hour rating)
    • Approved for use on wood swinging type fire doors rated up to and including 60 minutes (Specifiy "FR" option for 90 minute rating)

  • Reinforcement:
    • Door Side: Not required for door weight up to 200 lbs. ABH recommends a minimum 12 gauge plate/channel for heavier doors.
    • Frame Side: Not required for door weight up to 200 lbs. For doors more than 200 lbs., a 16 gauge channel is recommended.
Picture for finish US32 - 629 - Bright Stainless Steel
US32 - 629 - Bright Stainless Steel
Picture for finish Clear Anodized
Clear Anodized
Picture for finish Dark Bronze Anodized
Dark Bronze Anodized
Picture for finish Black Anodized
Black Anodized
  • "PT" Electrical Power Transfer Prep (Specify Electrical Power Transfer Model, Location & Handing
  • "FR" Fire Studs
  • 'AHT-HS" Advanced Hospital Tip for Half Surface Ligature-Resistant Applications (Specify Handing)
  • "WEDGE-HS" Adjustable Safety Wedge for Half Surface Models
  • "LR-BEAR" Ligature-Resistant Bearings
  • "DD" Dutch Door Prep
  • "SEC" Fasteners
  • "CUT" Cut to Custom Length
  • "TR" Tamper-Resistant (Hospital Tip, Every Other Bearing has a Set Screw) & Security Fasteners (Specify Door & Frame Material)
  • "TR-AHT-FS" Tamper-Resistant (Advanced Hospital Tip, Every Other Bearing has a Set Screw) & Security Fasteners (Specify Door & Frame Material) for Half/Full Surface
  • "SC" School Cap
  • "SPLICE" Spliced Hinge
  • "LL" Lead-Lined Cover (Half Surface & Full Surface - Door Leaf Only)
  • "SL" - Sheared Leaf
  • "THICK" Special Door Thickness
  • "CUSTOM HOLE" Custom hole locations
  • "CUSTOM FINISH"
Product tags

Phone:
(630) 875-9900

1222 Ardmore Ave.
Itasca, IL 60143

Email:
cs@abhmfg.com

Website Design and Development By David J Silva