[header.htm]
[navagationbar.htm]
[sidebar.htm]
 
printable catalog version

8000 Series
SURFACE MOUNT
Extra heavy-duty/heavy-duty overhead holder/stop for exterior, vestibule and interior doors, single acting.
 WHEN ORDERING,
please list:
- Model number

Door closer number or other hardware

Mounting means of the door and butt size

Hold-open or dead-stop degree

Door opening and thickness

Finish

SPECIFICATIONS:

Material:
Housing 1/8" thick; arm 1/4" thick and 1" wide; jamb bracket 1/4" thick and 1" wide. Hold-open mechanism-stop PIN #303 stainless steel; lock plate case hardened .0101 to .012 deep as manufactured by ABH.
STANDARD FEATURES
  • Non-handed, reversible
  • Single point hold-open in increments of 5 degrees from 85 to 110 degrees
  • Hold-open holder shall engage and release door automatically by brass/stainless steel handle, or act as a stop only
  • Extra heavy-duty holder has 1 1/2 times longer housing with steel shock absorbing spring
  • 5 to 7 degrees shock compression following hold-open point
  • Maximum opening 110 degrees, minimum door thickness 1-1/4"
  • Wood, machine screws and sex bolts included
  • Available in all BHMA plated finishes and US32 and US32D
  • For extra heavy-duty add HD before holder number. Four sex bolts provided for the door portion.
DOOR FRAME OPENING HOLDER NUMBER
BUTTS
OFFSET PIVOTS		 CENTER
HUNG		 HOLD-OPEN STOP
27"-32  7/16"
32  1/2"-38  11/16"
38  3/4"-42  7/16"
421/2"+Greater		 29  1/2"-34  15/16"
35-41  7/16"
41  1/2" - 44  15/16"
45"+Greater		 8010
8011
8012
8013		 8020
8021
8022
8023
BHMA NUMBER C03511 C03541
FED. SPEC. TYPE GJ80 GJ80

Contact ABH for special templating or other door opening.
Average weight/unit 3 1/2 lbs.
Extra heavy-duty average weight/unit 4 1/2 lbs.
[copyright.htm]
[footer.htm]