Door closer number or other hardware

Mounting means of the door and butt size

Hold-open or dead-stop degree

Door opening and thickness

Finish

SPECIFICATIONS:

Material:
Channel-steel/ stainless steel/brass 3/4" deep, 3/4" wide and .050 " thick; arm steel/stainless steel/brass 3/4" wide and 3/16" thick; jamb bracket 3/4" wide, 3/16" thick and 2-7/8" long; hold-open mechanism with sliding block will engage or release door by push or pull as manufactured by ABH, function changeable in field.

• Field adaptable functions
• Non-handed, reversible
• Single point hold-open in increments of 5 degrees from 85 to 110 degrees
• Automatic hold-open and release by push and pull on door
• Friction holder can be adjusted easily on site at any position and held under adjustable pressure
• Maximum opening 110 degrees, minimum door thickness 1-3/8"
• Both wood and machine screws included
• Available in all BHMA finishes