Patent No. 5,730,478
Patent No. 6,196,599

ENGRAVED MODELS, add the letter P after the numbers shown below, designate hand, and indicate how handles to be mounted.

NOTES:

- ABH does not provide mortise locks and cylinders.
- When cylinders are used, the handles must be mounted in the down or horizontal positions on the cylinder side. When a thumb turn is used, horizontal mounting is required.
- Please call us for trim fit for other manufacturers of mortise locks, or for special applications.

• Non-handed (except for engraved models)
• Push/pull can be mounted with the handles up, down or horizontal. When cylinders are used, only down or horizontal handles can be used. SEE NOTE
• No modification required on standard mortise lock preparation
• Compact non-handed covers provide maximum clearance between the handle and door for easy operation in any application
• U.L. classified
• Available in all BHMA finishes
• Meets ADA requirements

NOTE: Must use mortise lock for knob trim, do not use mortise lock for lever handle..