6700 Series Push Pull Trim For Mortise Locks
Trim Only used for other manufacturer's mortise locks, no modification required on standard mortise lock preparation

Features
• Non-handed (except for engraved models)
• Push/pull can be mounted with the handles up, down or horizontal. When cylinders are used, only down or horizontal handles can be used. SEE NOTE
• No modification required on standard mortise lock preparation
• Compact non-handed covers provide maximum clearance between the handle and door for easy operation in any application
• U.L. classified
• Available in all BHMA finishes
• Meets ADA requirements
NOTE: Must use mortise lock for knob trim, do not use mortise lock for lever handle.

Description
See Features and Additional Info for more details.

Additional Info
When ordering, please list:
• Finish
• Shaft or hub size of mortise lock
• Mortise lock mfg.

Engraved Models:
• Add the letter P after the numbers shown below, designate hand, and indicate how handles to be mounted.

NOTE:
• ABH does not provide mortise locks and cylinders.
• When cylinders are used, the handles must be mounted in the down or horizontal positions on the cylinder side. When a thumb turn is used, horizontal mounting is required.
• Please call us for trim fit for other manufacturers of mortise locks, or for special applications.

ABH Model #	Used With (Other Manufacturer)
6710	Best, Falcon, Marks
6720	Schlage
6730	Yale
6740	Corbin-Russwin
6750	Sargent
6760	PDQ
6770	Arrow

How To Order