ABH Master Catalog

Architectural Builders Hardware Manufacturing, Inc. 1222 Ardmore Avenue, Itasca, IL 60143 Tel: 630-875-9900 • Fax: 630-875-9918 / 800-932-9224 Web: www.abhmfg.com • Email: abhinfo@abhmfg.com I-2 2014 ABH Mfg., Inc. Pivots & Pivot Sets Innovation, Quality, Customer Service... Offset Pivots • Offset equals the dimension from the face of door to the pivot point • Pivot point is ¾” from heel edge of door • For single-acting doors only Reinforcing Pivots • Used with other hinges to alleviate door sag in existing openings • Surface mounts to the face of the frame header and the face of the door • For use on ⅛” inset doors with ¾” offset • Non-handed Parts Screw Packs – Specify the following when ordering: • • Finish • Door material & frame material • Example : 0195-SCR-US32D x MDMF • Options • – Eliminate the hassle of matching wires by adding Molex® Plug-in • – For instances when only the pivot bottom is needed in the set. • – Pin-in torx fasteners are supplied in lieu of standard for all exposed fasteners. Specify frame and door material . • – Extended spindle for bottom pivot is provided when additional clearance is required between the Available in increments up to 2” longer than standard – specify additional clearance required . • – Extended pin for top pivot is provided when additional top of the door. Available in ¼” increments up to ¾” longer than standard – specify additional clearance required . Center Hung Pivots • Pivot point is centered in thickness of the door • Does not return to center (not spring-loaded) • For use on double-acting doors, unless the door is stopped by a door stop mounted to the frame (cased opening frames) Pocket Pivots • Pivot point is located inside the frame • Maximum door swing is 90° • Door it is completely clear of the door opening pocket Pivot Types, Options & Parts FRAME STOP RABBET FRAME STOP RABBET ¾” Offset 1- ½” Offset CL CASED OPENING FRAME OF DOOR LC CL FRAME OF DOOR DOOR CLOSED DOOR IN POCKET PIVOT POINT