Stainless Steel Continous Pin & Barrel Hinges

Stainless Steel Continuous Pin & Barrel Hinges Innovation, Quality, Customer Service... Architectural Builders Hardware Manufacturing, Inc. 1222 Ardmore Avenue, Itasca, IL 60143 Tel: 630-875-9900 • Fax: 630-875-9918 / 800-932-9224 Web: • Email: 2015 v1.1 ABH Mfg., Inc. G-7 “CUT” - Cut to Custom Length If a non-standard length hinge is required, ABH will cut from the bottom of the hinge to the desired length as long as it does not interfere with a screw hole. Specify length and handing . “SPLICE” – Spliced Hinge For hinges exceeding 118- ¾” , ABH splices two separate lengths with an alternately split stainless steel pin that holds the barrel together. Specify length and handing . “HT” – Welded Hospital Tip Top of the hinge barrel is cut at a 45° angle and then welded to help provide and support a safer environment in hospitals and other institutions. Specify handing . “DD” – Dutch Door Go online for order form or, specify top and bottom door leaf heights as well as clearance required between top and bottom and handing when ordering. “STUD” – Security Studs ½” diameter stainless steel studs are permanantly mounted to the frame leaf projecting ¼” and extend into the door leaf for added security. “AS” – Adjustable Studs Threaded studs are supplied for hinges with door edge guards on both faces of the door to help correct door alignment issues up to ⅜” . Additional door reinforcement required. Specify wood or metal door. “SEC” – Security Fasteners Security fasteners are supplied in lieu of standard fasteners for all exposed areas. Specify wood or metal door and frame “SNB” – Sex Bolts When using on wood doors, sex bolts are provided for the surface mounted door portion. “LL” – Lead-Lined Lead is provided for the door portion fastener cover for half surface and full surface hinges. “SL” – Sheared Leaf Concealed leaf is sheared to accommodate a 1- ⅜” thick door. “ADB” – Cut for Automatic Door Bottom Specify automatic door bottom model when ordering. “CUSTOM HOLE” Contact factory with custom mounting hole locations desired for unusual frame and/or door conditions. Restrictions apply. “NO HOLE” Contact factory for hinge without mounting holes. “CUSTOM FINISH” factory for details. Customer color sample approval will be required prior to fabrication. Non - Electrical Options A5500WT