- For 5-3/4" and 6-3/4" frame with
1-3/4" door
- To be used with ABH 0128 and 370
center hung pivot sets. Ideal for hospital or nursing home
bathroom doors. Strikes allow center hung or 1/8" inset
double acting doors to swing on or out without damaging the
frame.
- Counterweight door stop can be
rotated flush with the strike to allow door to swing in
either direction in the event of an emergency.
- Cut out is 1-1/4" x 11/16" to meet
ANSI standards for mortise or HD cylindrical latch bolts.
Check with manufacturer of specific mortise locks or latch
bolts for deviations from these dimensions.
- Available in US32D, US32, US3,
US4, US10B. For other finishes, contact factory. .093 thick
material.
- 8-32 x 1/2" FHMS standard.
- Templates available for frame
prep.
- Meets ANSI A1882
|
